1440hp NA 588 conventional head - $30,000

Listed By FB_1434932845
Contact (734) 926-6067
1440hp NA 588 conventional head  for Sale $30,000
$30,000
Private Seller - FB_1434932845
CANTON, MI
Message Seller
+ Add to Favorites
Report This Ad

Item Details

Ad Number183215304
ConditionUsed

Updates From Seller

Price lowered to 30000 Above Added: Thu May 9, 2019, 12:55 pm PST

Description

Please Contact Alex Hays at 7349266067 if you're a serious potential buyer, no tires kickers if you low ball me Ill tell you to go eat a dick

Motor will need a Hone, a set of .937 key way lifters and possibly pistons to match current bore in block, or use new pistons in your block/new block and hone your block to fit them. I can get you a new big M block and used lifters if byer would like. I was waiting on a different block with a raised cam location and wider pan rails to put this motor back together in since last September to try and do some different stuff to look for more power, no ETA on when that block will be available (Dart Big M Pro 9.8” deck) Nothing is wrong with current block at all. Due to the fact I cant get that raised cam block and me relocating to the South, I’ve decided to sell my world record holding motor. It is currently disassembled and at Mid South Racing Engines in Tennessee. Will be picking it all up still disassembled in the next few weeks. Or Buyer can pay to have it assembled by Ian Landies at Mid South Racing Engines.

Conventional headed 589” BBC has been 4.693 @ 153.81 @2905lbs (efi), 4.697 @ 151.65 @ 2915lbs (efi) and 4.691 @ 144 @2850lbs (carb) All passes made on a 275 drag radial. Current world record holding engine for an Naturally Aspirated drag radial combo. Would make a stellar nitrous combo.

Motor was never on an engine dyno after EFI swap but estimated to make 1420 to 1440 at the crank based off ET and weights ran at various track and various conditions. It was put on a chassis dyno with 2 pulls to 9000 made 1180 rwhp at 9000rpm with a 8300rpm loose stall converter. With a 2.800” carb and before cam changes the motor made 1395hp and 926 ft lbs on the first pull to 8500 rpm on bob book racing engines dyno; before dyno had issues and we were not able to run it to max rpm motor peaks at 9000. Runs 8300 to 9700 normally. EFI swap and cam changes picked up ET and HP based on improvements with ET and MPH in 2017 and 2018

Block:

Dart Big M 9.8” deck 4 bolt main

Bore 4.652

Bushed for .937 keyway lifters

55mm roller bearings

Custom oiling mods in valley

Screens on oil returns

Setup for Dry sump oiling currently

Fresh Line bore with new main caps in 2017

Will need to be Honed

Setup with engine plate and mid plate

Setup for remote water pump

Heads:

Slick Rick SR20 heads New 2018. These heads are considered to be the highest flowing and quickest set of conventional heads out there at the moment per rick him self, hundreds of hours of R&D went into them. Custom hand porting with extensive work done.

Intake and exhaust valves will be disclosed privately.

Have flow sheets that will be disclosed to serious buyers

Just Freshened with all new components February 2019

Jesel Custom built rocker system (Big $) Billet steel rockers shaft mounted rockers

1PC billet rocker stand

Multiple custom cut 1pc stand shims for different cam lifts to keep geometry correct

New Custom PSI springs with extras (Can get them without issues have part number)

New never ran Victory Titanium valves.

Fresh Valve job

Titanium retainers

Steel keepers

New seals

O-Ringed exhaust ports (no gaskets or RTV needed)

Oil drain backs in heads with lines to pan.

Valve Covers:

Billet SR20 valve covers with o ring, passenger side has fitting for vac pump hose.

Uratchko Racing Engines engraved in top of valve covers can be machined out.

Stainless bolts, valve covers designed to clear rocker system

Intake: Billet Marcella Manifolds single plane manifold custom built for heads Billet bottom and top.

Can be ran with carb if wanted. Currently setup for EFI but no changes were made minus bungs when EFI swap was done. Water fittings included. Setup for dry sump valley scavenge in rear and vac sensor.

Dual map sensor fittings in rear of intake can be used for Map and air temp (currently setup like that)

Custom adapter for top for either carb or EFI Throttle body. -12AN fuel rails for big fuel.

Throttle Body: Visner/Holley Big Oval Throttle body, fits 4500 flange and bolt pattern. Flows 2550 CFM

4 EFI Injectors with rails and lines setup to spray fuel under blades to cool aircharge (worth big power on dyno and ET on track)

Fuel Injectors:

120lb/hr Bosch Motorsport injectors in runners

19lb Bosch Motorsports injectors in throttle body.

Have a set of 8, 160lb/hr Billet atomizer injectors just gone through and rebuilt by Jack French at atomizer.

Wanted to try them never had the chance to back to back them. Figured spray pattern is worth power.

Crank:

New Winberg Billet Crank 4.350 stroke June 2017

Standard main standard rod journals

2.100 rod journals SBC

Knife edged

Cross drilled

All the works minus polishing

Rods:

Billet Steel Carrilo Rods brand new April 2019

New design to correct a design flaw in previous rods.

Pistons:

Brand new May 2019 CP pistons extremely thin prostock/NA ring package

Just shipped May 1st, 2019

Custom Pins for rod and pistons

Pushrods:

Trend Top alcohol pushrods with self lubing tip

Lifters:

Will need a new set of .937 keyway lifters sold previous set was going be putting a large wheel guided lifter in but never got around to it.

Front Drive:

Jesel Belt Drive with new drive cover never installed

Cam:

Custom 55mm grind by Bullet, specs from Uratchko Racing Engines

Have Cam Doctor Data and Spintron data on cam. Specs will be given to buyer.

Never reground.

Oil Pan: Moroso 4 stage dry sump pan with big kick out, sectioned scavenges with screens on all fittings. Oil Returns from heads to pan

Oil Pump: Daily Engineering 6 stage “prostock” pump with HTD pulleys, Big Money pump (numerous different pressure springs included” Custom no collapse oil lines on all scavenge lines. Valley scavenge and 4 scavenge lines in pan.

-20 out let to dry sump tank

Oil Tank and Filter:

Stefs custom aluminum dry sump tank with connected over flow and breather. System takes around 8 qts (0-5 or 0-20 oil. Have several cases of 0-20 LAT racing oil to go with motor)

Billet filter housing using chevy style filters, always ran Wix or K&N filters

Balancer and Crank Drive:

ATI balancer

Peterson Spline Drive system setup to run oil pump at proper speed for engine rpm.

Vac Pump:

Moroso 4 vane enhanced design vac pump: System pulls 22-24” mmHg depending on weather conditions Hose to valve cover. Moroso puke tank with breather included.

Electronics:

Motor is setup currently for Holley EFI.

Has Holley cam sensor

Holley crank sensor using MSD flying magnet crank trigger wheel.

Set up for Coil Near Plug ignition system

Will give Buyer all tunes. Will also sell Buyer all EFI components needed at Dealer cost (keeping the current efi system with the car for now)

Headers: Will include with entire motor. Fit fox Mustang with outlaw k member and turbo 400 may fit other combos as well.

Custom Built stainless 4-1 under car headers Built by Calvin Elston at Elston Exhaust in Mathew, NC (Guy that invented the Tri Y header for nascar probably the only guy that knows how to tune a header around an engines demands, one of the smartest out there when it comes to exhaust) Headers were built and tuned to Rpm band and power levels, 10 02 bungs, 1 in each primary and one in each collector. Ran 10 02s on the car to get air fuel perfect in each cylinder.

Extras: Several flex plates including a brand new never ran Billet aluminum Reactor flex plate.

2 Big block Chevy mini starters to fit exhaust and oil pan.

2 Custom Built Air pans for MCS cowl hoods (worth over a tenth of a second in the ¼ mile vs no pan) Built by skinny kid Racecars. Will include if buyer purchases whole setup.

87-93 mustang MCS 4” fiberglass cowl hood with dzuz fasteners installed for billet rails, hood cut for hood scoop, painted custom blend of calypso green. Hairy Glass Prostock big D hood scoop with mounts to go to motor plate, custom air pan in scoop to fit Visner throttle Body, (Air inlet temp sensor mounted in rear of pan). Painted Tuxedo Black. $1200 for hood and scoop see pictures of hood on car below.

Billet 8” Bolt Together Neal Chance Converter with Titanium bolts, 5 billet stators built and ran with combo have data on all of them. Spare o rings, bearings and shims $5500

Rossler Built turbo 400, stock case with Clean Neutral, lightened billet aluminum drums and internals, Custom Coan gear sets 1.66, 1.31. 1.0 and 1.60, 1.22, 1.0 ratios available, roller tail shaft, moroso sheetmetal pan with drains/temp sensor ports. Lokar Dipstick, SFI Ultra Bellhousing for chevy. Low pressure pump for reduced drag. Trans was just gone through. Coan Billet forward manual Valve body with clean neutral, Coan Billet quickrelease trans brake with single wire setup. Looped lines. Never got above 140 pan temps even after multiple rounds with little turn around. $6500

Will sell Trans and converter/stators together for $11000

Fuel Pump: Weldon 2345a Bought brand new in Feb 2019 has only 9 runs on it $850

Videos of it running

https://youtu.be/BW61n_xVx10?t=161

https://www.youtube.com/watch?v=Kw3ULKL2WxY

https://www.youtube.com/watch?v=a8xNDPU6Eq4

Payment Details

TradesNot Accepted
Accepted Payment Methods Paypal, Credit Card, Cash

Seller Notes

Buyer to pay shipping or pick up locally

Message Seller

Send Message

About The Seller

PRIVATE SELLER
FB_1434932845
Member Since May 2019
CONTACT INFORMATION
CANTON, MI
(734) 926-6067
Honor Payments
Lifetime: 0
Last 12 months: 0 Learn More
No Achievements Yet
Bronze Seller Silver Seller Gold Seller Platinum Seller Power Seller
Get Transportation Rates

Location

View All Resources

Buyer Resources

Insurance
Shipping

Compare shipping quotes and save up to 80%

More From This Seller

  • 1400+ HP SR20 588ci BBC

    $25,000
    CANTON, MI
  • 1400+ HP SR20 588ci BBC

    $25,000
    CANTON, MI
Similar Classifieds
Copyright © 2005-2019 MH Sub I, LLC dba Internet Brands All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy